Plastic Thinner 1 Liter | 775.L01.000

PLASTIC Thinner

• Thinner for ECS PLASTIC
• The mixing ratio always depends on the type of spray application or dipping process.
• Depending on the desired flow behavior, the appropriate amount of thinner must be added to the concentrate.
• For spray application, a dilution ratio of 1:1 is recommended, which results in very good flow behavior with a thin layer.
• For a thicker layer, a mixing ratio of 3 parts concentrate to 1 part thinner can be used.
• Caution: Water-based solvents and alcohols must not be used for dilution.

Safety Data Sheet

Technical Data Sheet